{"title":"MX5 NC N7 Gearbox Conversion Parts","description":"Here you will find all of the parts we can supply for fitting the Mazda NC\/N7 gearbox to your engine and into your car.","products":[{"product_id":"rx8-mx5-universal-gearbox-mount-crossmember","title":"RX8 \u0026 MX5 Universal Gearbox Mount\/Crossmember","description":"\u003cp\u003eThis gearbox mount\/crossmember is a 4 part unit that is height adjustable and comes complete with rubber bushing. The mount is designed to bolt to the 2004-2008 5 and 6 speed RX8 gearboxes and the 5 speed N7\/NC MX5 gearbox.\u003c\/p\u003e\n\u003cp\u003eThe mount is designed to span the width of your tunnel and can be mounted by drilling holes through your floor and bolting in place or you can weld some brackets to your tunnel and pick up on the inner set of holes.\u003c\/p\u003e\n\u003cp\u003eThe dimensions of the units can be seen in the attached drawing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45837310001456,"sku":"BREGBMOUNT","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/FullSizeRender.heic?v=1745495091"},{"product_id":"zetec-pinto-2-3-galaxy-rx8-starter-motor-top-mounted-solenoid","title":"Zetec\/2.3 Galaxy RX8, MX5 (passenger side) and Type 9 Gearbox Starter Motor Top Mounted Solenoid","description":"\u003cp data-mce-fragment=\"1\"\u003eThis fits both the RX8 and MX5 adaptor plates.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1.4Kw starter motor to fit Zetec engines when used with a Zetec or lightweight racing flywheel that uses Zetec ring gear position.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis starter also works with the 2.3 Galaxy engine with 1800CVH flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe solenoid position is on top of the starter when fitted with an adaptor plate where the starter mounting is on the passenger side of a RHD car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis can also be used with the adaptor plate that has the starter on the drivers side on a RHD car but will put the solenoid at the bottom. Not suitable for 105E in this setup.\u003cbr\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45855282594096,"sku":"BRESTART07","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/Starterpassengertop.jpg?v=1697233561"},{"product_id":"zetec-pinto-2-3-galaxy-rx8-starter-motor-bottom-mounted-solenoid","title":"Zetec\/ST170\/2.3 Galaxy RX8, MX5 (passenger side) and Type 9 Gearbox Starter Motor Bottom Mounted Solenoid","description":"\u003cp data-mce-fragment=\"1\"\u003eThis fits both the RX8 and MX5 adaptor plates and also type 9 gearboxes.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1.4Kw starter motor to fit Zetec engines when used with a Zetec or lightweight racing flywheel that uses Zetec ring gear position.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis starter also works with the 2.3 Galaxy engine with 1800CVH flywheel.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe solenoid position is on the bottom of the starter when fitted with an adaptor plate where the starter mounting is on the passenger side on a RHD car.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45855286296880,"sku":"BRESTART58","price":125.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/Starter.jpg?v=1697233720"},{"product_id":"zetec-2-3-galaxy-pinto-crossflow-bda-to-mx5-nc-5-speed-gearbox-adaptor-plate","title":"Zetec\/ST170\/2.3 Galaxy\/Pinto\/Crossflow\/Pre-Crossflow\/BDA to MX5 NC N7 5 Speed Gearbox Adaptor Plate - Cable Clutch - Passenger side starter","description":"\u003cp\u003eThis adaptor plate will allow you to fit a Mazda NC N7 5 speed gearbox behind your Zetec, Pinto, 2,3 Galaxy, Crossflow, Pre-Crossflow or BDA Engine. \u003c\/p\u003e\n\u003cp\u003eThe plate is laser cut to ensure accuracy and repeatability so all adaptor plates are manufactured and fit the same.\u003c\/p\u003e\n\u003cp\u003eThe top two countersunk holes are used to align the centre line of the adaptor plate to the centre line of the crankshaft. The plate is supplied with the two countersunk M10 screws for this and 3\/8 for the Crossflow, Pre-Crossflow and BDA. \u003cspan\u003eThere are 2 dowels welded into the adaptor plate that then line the gearbox to the crank centreline.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYour gearbox will need notching slightly to clear the nose of the starter you are using unless it is a lightweight\/hi torque type unit with no nose. The starter position is on the passenger side of the car with this adaptor plate.\u003c\/p\u003e\n\u003cp\u003eThe gearbox can not be used with the standard external slave cylinder with this adaptor plate as it clashes with the starter location. You will need one of our \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-nc-5-speed-cable-clutch-fork-conversion\"\u003ecable clutch conversion kits\u003c\/a\u003e and \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eRX8 release bearings\u003c\/a\u003e, the standard bearing cannot be used or one of our hydraulic concentric release kits. \u003c\/p\u003e\n\u003cp\u003eWith this adaptor plate on a Zetec the preferred setup for flywheel, starter and clutch is one of the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1800 Zetec flywheel drilled for pinto pressure plate and MX5 1.8\/2.0 22 spline friction plate.\u003c\/li\u003e\n\u003cli\u003eSteel lightweight manufactured flywheel with pinto pressure plate and MX5 1.8\/2.0 22 spline friction plate. \u003c\/li\u003e\n\u003cli\u003eOne of our 1.4Kw starters. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/zetec-pinto-2-3-galaxy-rx8-starter-motor-top-mounted-solenoid\"\u003eClick here for Top Mount Solenoid.\u003c\/a\u003e \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/zetec-pinto-2-3-galaxy-rx8-starter-motor-bottom-mounted-solenoid\"\u003eClick here for Bottom Mount Solenoid.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePinto engines use standard flywheels and starters and run a type 9 pressure plate with MX5 22 spline 1.8\/2.0 friction plate.  \u003c\/p\u003e\n\u003cp\u003eThe 2.3 Galaxy engine uses 1800 CVH Sierra flywheel, pinto pressure plate, MX5 22 spline 1.8\/2.0 friction plate and one of our \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/zetec-pinto-2-3-galaxy-rx8-starter-motor-bottom-mounted-solenoid\"\u003e1.4Kw bottom solenoid starters\u003c\/a\u003e. Bottom solenoid is used mostly in Unlimited bangers to clear the downpipe.\u003c\/p\u003e\n\u003cp\u003eCrossflow engines use a standard crossflow, flywheel and 3 bolt starter motor and one of our Heavy duty crossflow Mazda NC sprung centre clutches. These are found by \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/crossflow-to-mazda-nc-gearbox-uprated-clutch\"\u003eclicking here.\u003c\/a\u003e You can use any steel aftermarket xflow\/prexflow flywheel and its matching starter whether it is 110 or 135 tooth.\u003c\/p\u003e\n\u003cp\u003eThe adaptor plate is supplied with all fastenings to bolt the engine to the adaptor plate, the gearbox to the adaptor and the starter to the adaptor plate. See attached drawing for fastener size and locations.\u003c\/p\u003e\n\u003cp\u003eYou will need one of our spigot bearings for the rear of the crank. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/pre-crossflow-spigot-input-shaft-bearing-mx5-nc-conversion\"\u003eClick here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePlease read the fitting guide before fitting your kit. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/pages\/mx5-nc-gearbox-fitting-guide\"\u003eFitting guide is here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Crossflow\/BDA","offer_id":55102881431929,"sku":"BREZTCNCADAPT","price":105.0,"currency_code":"GBP","in_stock":true},{"title":"Zetec\/Pinto\/2.3 Galaxy","offer_id":55102965940601,"sku":null,"price":105.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/7F10BA6B-CD25-4B63-AD42-6CCC8836BFB0.jpg?v=1745494563"},{"product_id":"zetec-2-3-galaxy-pinto-crossflow-bda-to-mx5-nc-5-speed-gearbox-adaptor-plate-anglia-fitment","title":"Zetec\/ST170\/Pinto\/2.3 Galaxy\/Xflow\/PreXflow\/BD Series to MX5 NC N7 5 Speed Gearbox Adaptor plate - Hydraulic Clutch - Drivers side starter","description":"\u003cp\u003eThis adaptor plate will allow you to fit a Mazda MX5 NC N7 5 speed gearbox behind your Zetec, Pinto, Kent based engine or 2,3 Galaxy engine and put the starter motor on the drivers side. This is needed in Anglia 105e's for starter clearance.\u003c\/p\u003e\n\u003cp\u003eThe plate is laser cut to ensure accuracy and repeatability so all adaptor plates are manufactured and fit the same.\u003c\/p\u003e\n\u003cp\u003eThe top two countersunk holes are used to align the centre line of the adaptor plate to the centre line of the crankshaft. The plate is supplied with the two countersunk M10 or 3\/8 UNC screws for this. \u003cspan\u003eThere are 2 dowels welded into the adaptor plate that then line the gearbox to the crank centreline.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYour gearbox will need notching slightly to clear the nose of the starter you are using.\u003c\/p\u003e\n\u003cp\u003eThe gearbox can be used with the standard external slave cylinder and an \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eRX8 bearing\u003c\/a\u003e, the MX5 bearing cannot be used due to its profile or one of our hydraulic concentric release kits. Cable clutch conversion isn't an option due to the starter position. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-n7-5-speed-hydraulic-concentric-release-kit\"\u003eClick here for the concentric release kit for this adaptor plate.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe starter motor is mounted on the drivers side the same as a standard 105e Anglia and clears the 105e crossmember.\u003c\/p\u003e\n\u003cp\u003eWith this adaptor plate on a Zetec the preferred setup for flywheel, starter and clutch is one of the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1800 Zetec flywheel drilled for pinto pressure plate and MX5 1.8\/2.0 friction plate.\u003c\/li\u003e\n\u003cli\u003eSteel lightweight manufactured flywheel with pinto pressure plate and MX5 1.8\/2.0 friction plate. \u003c\/li\u003e\n\u003cli\u003eDepending on the engine mounts used, you may get away with a normal style starter but to ensure adequate clearance you will need a WOSP\/Powerlite style starter where the solenoid position can be rotated with a zetec.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePinto engines use standard flywheels and starters and run a type 9 clutch cover with MX5 NC clutch centre which we sell \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/215mm-clutch-drive-plate-only-for-mx5-nc-n7-5-speed-gearbox-1x23-spline-standard-duty\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe adaptor plate is supplied with all fastenings to bolt the engine to the adaptor plate, the gearbox to the adaptor and the starter to the adaptor plate. See attached drawing for fastener sizes and positions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Crossflow\/BDA","offer_id":55089774854521,"sku":"BREZTC105NCADAPT","price":105.0,"currency_code":"GBP","in_stock":true},{"title":"Zetec\/Pinto\/2.3 Galaxy","offer_id":55089781604729,"sku":"","price":105.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/IMG-1240.heic?v=1745494412"},{"product_id":"mx5-nc-5-speed-cable-clutch-fork-conversion","title":"MX5 NC 5 Speed Cable Clutch Fork Conversion","description":"\u003cp\u003eA fabricated clutch fork and pivot bracket for converting the 5 speed Mazda MX5 NC N7 gearbox from hydraulic actuation to cable to suit a cable pedal box.\u003c\/p\u003e\n\u003cp\u003eThe clutch fork accepts the standard Mk1 and Mk2 Escort style clutch cable end. The cable can be easily adjusted with the 2 nuts on it that pass through the mounting lug on the adaptor plate.\u003c\/p\u003e\n\u003cp\u003eThe kit contains a bracket that fixes into the gearbox bellhousing utilising existing bolt holes but is supplied with new 5mm longer bolts to account for the thickness of the bracket.\u003c\/p\u003e\n\u003cp\u003eThe Mazda RX8 release bearing is used with this conversion kit to work with the clutch fingers on most pressure plates. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eThese can be found here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe fitting guide \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/pages\/mx5-nc-gearbox-fitting-guide\"\u003ecan be found here,\u003c\/a\u003e giving details of where to cut the hole in the side of the gearbox and fit the parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis will not work with a twin plate clutch.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45902094827824,"sku":"BRENCCCK5","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/32CBED65-3B48-46D6-8D48-EC1FB9147E82.jpg?v=1694331635"},{"product_id":"rx8-5-6-speed-release-bearing","title":"RX8 5 \u0026 6 Speed and MX5 NC Release bearing","description":"\u003cp\u003eNew direct replacement release bearing for standard RX8 5 and 6 speed hydraulic clutch forks and also used in all of our own cable clutch conversion kits.\u003c\/p\u003e\n\u003cp\u003eThese release bearings are required for all MX5 NC conversions as they are flat faced to suit the clutch fingers.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45906350768432,"sku":"RX8RELBRG","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/355C8B5B-C383-4FE6-9F94-07B3BCF22938.jpg?v=1744883461"},{"product_id":"starter-motor-for-mx5-nc-anglia-105e-adaptor-plate-drivers-side-starter","title":"Zetec\/2.3 Galaxy Starter Motor for MX5 NC gearbox Drivers side fitment (solenoid at the top)","description":"\u003cp\u003e1.4Kw starter motor for the drivers side placement, hydraulic clutch adaptor plate for the Zetec and 2.3 Galaxy engine engine where the starter is mounted on the drivers side of the car.\u003c\/p\u003e\n\u003cp\u003eThis will fit Zetec engines when used with a Zetec or lightweight racing flywheel that uses Zetec ring gear position.\u003c\/p\u003e\n\u003cp\u003eThis starter also works with the 2.3 Galaxy engine with 1800CVH flywheel.\u003c\/p\u003e\n\u003cp\u003eThis starter has the solenoid mounted on the top when fitted with the drivers side starter adaptor plate. This will not fit an Anglia crossmember as the battery terminal touches the crossmember. A WOSP\/Powerlite style slim starter with rotating fitment is needed.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45937255874864,"sku":"BRESTART58","price":125.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/Starter3.jpg?v=1697233460"},{"product_id":"mx5-n7-5-speed-hydraulic-concentric-release-kit","title":"MX5 NC N7 5 speed Hydraulic concentric release kit","description":"\u003cp data-mce-fragment=\"1\"\u003eA kit to convert what is normally an externally mounted slave cylinder on the MX5 NC N7 5 speed gearbox to a hydraulic concentric release. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith many cars there are clearance issues with the external cylinder clashing with the exhaust so this kit does away with the external cylinder and puts the clutch release mechanism inside the box.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit is setup to suit the 90mm clutch height on a Pinto with standard style clutch or Zetec that is using an 1800 flywheel and pinto clutch or Zetec with steel flywheel and Pinto clutch.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePLEASE CHECK YOUR CLUTCH HEIGHT BEFORE ORDERING IF IT IS DIFFERENT TO THE ABOVE AS SHIMS MAY BE REQUIRED  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor other engines or different clutch heights plus get in touch before ordering to confirm the mounting plate spacer thickness.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese have a single feed and bleed port so an inline tee piece with bleed nipple works best for removing any air. We sell these as a kit and can be found \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/feed-and-bleed-lines-for-concentric-release-conversions\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe kit contains the following parts:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 off Mounting bolts for bolting the mounting plate to the bellhousing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3 off Mounting bolts for bolting the slave cylinder to the mounting plate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHydraulic concentric slave cylinder with bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/pages\/mx5-nc-gearbox-fitting-guide\"\u003eInstructions for fitting the kit can be found here. \u003c\/a\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":45939486228784,"sku":"BREHYDRELNC5","price":124.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/6SpeedConcentric1_5c88dc31-a71d-42d5-a459-b243d24eef62.jpg?v=1690977630"},{"product_id":"mx5-nc-nc-starter-cut-out-blanking-plate","title":"MX5 NC NC Starter Cut out blanking plate","description":"This aluminium blanking plate covers up the notch in the gearbox where the standard MX5 starter motor would usually sit.","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":46060413550896,"sku":"BRENCSTRTBLNK","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/D9D1FDBE-3500-4B6A-B31B-05AC4D158398.jpg?v=1692298177"},{"product_id":"mx5-nc-nc-original-clutch-fork-blanking-plate","title":"MX5 NC NC Original Clutch Fork blanking plate","description":"This aluminium plate goes over the hole in the bellhousing where the original clutch fork comes out. This is used when running one of our Hydraulic concentric release kits or cable clutch fork conversions.","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":46060415910192,"sku":"BRENCCLTBLNK","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/24D9C580-ADCF-4167-9D71-C7A1FD659747.jpg?v=1692298100"},{"product_id":"rx8-mx5-type-9-gearbox-rubber","title":"RX8, MX5, Type 9, Cortina Mk1 gearbox rubber","description":"\u003cp\u003eA replacement gearbox rubber as used in our universal gearbox mount for the RX8 and MX5 gearbox. \u003cbr\u003eThis also fits straight on the bottom of a type 9 gearbox and as a replacement Mk1 Cortina rubbers and will fit most Ford RWD gearboxes. \u003c\/p\u003e\n\u003cp\u003eThese can be used when fabricating your own gearbox mounts for your Mazda or Ford box.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":46239907447088,"sku":"GBOXRUB","price":23.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/IMG-0924.heic?v=1692297651"},{"product_id":"untitled-aug17_19-42","title":"RX8 \u0026 MX5 gearbox wedge mount","description":"\u003cp\u003eRX8 5 and 6 speed and MX5 NC gearbox wedge. This wedge fits all three gearboxes. It is the same part as used in our universal gearbox mount kit. \u003c\/p\u003e\n\u003cp\u003eThese can be used if you want to make your own custom mount and fit in an original Ford rubber.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":46285751648560,"sku":"BREGBOXWDG","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/IMG-0922.heic?v=1692297884"},{"product_id":"crossflow-to-mazda-nc-gearbox-uprated-clutch","title":"Xflow and PreXFlow 190mm Heavy Duty Organic Clutch for Mazda NC N7 Gearbox","description":"\u003cp\u003eThese are our custom clutches that are needed when fitting a Mazda MX5 NC gearbox to your crossflow or pre-crossflow engine.\u003c\/p\u003e\n\u003cp\u003eThe clutches are a direct bolt on fit to your existing cast flywheel or lightweight steel flywheel. All original fixings can be retained.\u003c\/p\u003e\n\u003cp\u003eThe clutch is 190mm and features a compatible spline for the MX5 gearbox. The centre plate is a heavy duty sprung item with organic lining which is suitable for fast road applications and being sprung gives good feel and driveability.\u003c\/p\u003e\n\u003cp\u003eThis is a 2 part item comprising of pressure plate and centre driven plate.\u003c\/p\u003e\n\u003cp\u003eThis can be used with the standard clutch and slave cylinder, \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-n7-5-speed-hydraulic-concentric-release-kit\"\u003ethe hydraulic concentric kit\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-nc-5-speed-cable-clutch-fork-conversion\"\u003ecable clutch conversion.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur RX8 and MX5 release bearing must be used when using this clutch.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":55089820598649,"sku":"XFLOWNCCLUTCH","price":170.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/EDDE4F7F-0FC2-46EB-A772-65E94E9118B6.png?v=1744114777"},{"product_id":"untitled-apr19_09-40","title":"Mazda MX5 Mk3 NC N7 5 speed gearbox","description":"\u003cp\u003eMazda MX5 Mk3 NC N7 5 speed gearbox complete with clutch arm and gearstick. No adaptor plate or conversion parts are included. Please click on the relevant parts and add to your basket.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eComplete gearbox to be used with our Zetec, Pinto, Crossflow, 2.3 Galaxy conversions.\u003c\/p\u003e\n\u003cp\u003eThe box does not come with a release bearing as you will need one of our RX8 MX5 bearings. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eClick here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe ratios for this box are as follows\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1st gear: 3.136:1, 2nd gear: 1.888:1, 3rd gear: 1.330:1, 4th gear: 1.000:1, and 5th gear: 0.814:1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePallet delivery to UK mainland only. \u003c\/p\u003e\n\u003cp\u003eNo warranty is given on these gearboxes and mileages will be marked on them if available. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":55131187315065,"sku":null,"price":285.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/6F93D4EA-F774-4130-9021-A29E3647DC29.jpg?v=1745322162"},{"product_id":"215mm-clutch-for-pinto-and-zetec-to-mazda-nc-n7-gearbox","title":"215mm Clutch for Pinto and Zetec to Mazda NC N7 Gearbox","description":"\u003cp\u003eThese are our clutches that are needed when fitting a Mazda MX5 NC gearbox to your pinto or zetec engine. These clutches are a 'standard' spec clutch for most fast road setups.\u003c\/p\u003e\n\u003cp\u003eThe clutches are a direct bolt on fit to your existing cast flywheel or lightweight steel flywheel with a pinto. All original fixings can be retained. When using a zetec an 1800 zetec flywheel redrilled to take pinto clutch is required. Or a steel flywheel that takes a pinto clutch.\u003c\/p\u003e\n\u003cp\u003eThe clutch is 215mm and features a compatible spline for the MX5 gearbox. The centre plate is a sprung item with is suitable for fast road applications.\u003c\/p\u003e\n\u003cp\u003eThis is a 2 part item comprising of pressure plate and centre driven plate.\u003c\/p\u003e\n\u003cp\u003eThis can be used with the standard clutch and slave cylinder, \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-n7-5-speed-hydraulic-concentric-release-kit\"\u003ethe hydraulic concentric kit\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-nc-5-speed-cable-clutch-fork-conversion\"\u003ecable clutch conversion.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur RX8 and MX5 release bearing must be used when using this clutch. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eClick here.\u003c\/a\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":55222640050553,"sku":"215MMCLUTCHNC","price":165.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/EDDE4F7F-0FC2-46EB-A772-65E94E9118B6.png?v=1744114777"},{"product_id":"pre-crossflow-spigot-input-shaft-bearing-mx5-nc-conversion","title":"Pre Crossflow spigot\/Input shaft bearing MX5 NC Conversion","description":"\u003cp\u003eInput shaft\/Spigot bearing for fitting in the rear of the crank when fitting a Mazda MX5 NC or RX8 gearbox to your crossflow or pre crossflow engine.\u003c\/p\u003e\n\u003cp\u003eThis is a sealed roller bearing for the rear of the crank.\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":55340723306873,"sku":"BREPREXFLOWBRG","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/05EE45F1-3422-419E-92F3-7280869F17B4.jpg?v=1750162993"},{"product_id":"anglia-105e-to-mx5-nc-gearbox-propshaft","title":"Single piece Propshaft Anglia 105e Kent to MX5 NC 5 speed gearbox","description":"\u003cp\u003eThis propshaft is designed to fit your 105e Anglia with Pre-crossflow or crossflow engine and one of our Mazda MX5 NC gearbox conversions. The propshaft is a single piece steel construction with brand new joints both ends and can be supplied with large or small English axle flange at the diff end. \u003c\/p\u003e\n\u003cp\u003eSmall flange diffs have an outside diameter of approximately 86mm and large flanges have approximately 92mm overall diameter. If you are unsure please get in touch before ordering.\u003c\/p\u003e\n\u003cp\u003eThe propshaft is designed fit standard engine positions on the crossflow and standard and 10mm forward spaced pre-crossflow engines, to allow for carb clearance. Length of the propshaft is based around a gap of 1080mm between the rear of the gearbox and the diff flange  \u003c\/p\u003e\n\u003cp\u003eNo bolts are supplied for the diff joint.\u003c\/p\u003e\n\u003cp\u003eThese propshafts are made to order so allow approximately 2-3 weeks for delivery. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Small Flange","offer_id":56223436374393,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true},{"title":"Large Flange","offer_id":56252200649081,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"rx8-5-and-6-speed-cable-clutch-fork","title":"MX5 NC 5 speed, RX8 5 and 6 speed Cable Clutch Fork","description":"\u003cp data-mce-fragment=\"1\"\u003eA fabricated clutch fork for converting the 5 and 6 speed Mazda RX8 and Mazda MX5 NC 5 speed gearbox from hydraulic actuation to cable to suit a cable pedal box.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is the same fork as used in our conversion kits on all 3 gearboxes.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe clutch fork accepts the standard Mk1 and Mk2 Escort style clutch cable end. The cable can be easily adjusted with the 2 nuts on it that pass through the mounting lug on the adaptor plate.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis fork is for when you just need a replacement fork. It is advised to purchase the complete kit for your engine setup with the relative pivot point and spacer if needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe standard Mazda release bearing is used with this conversion kit which can be bought here.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\" data-mce-fragment=\"1\"\u003eRelease bearing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/pages\/five-speed-cable-clutch-fork-and-bracket-fitting-instructions\"\u003eThe fitting guide can be found here giving details of where to cut the hole in the side of the gearbox.\u003c\/a\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":56371605766521,"sku":"RX8FRK","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/43DE83A4-08ED-4C5D-85A7-4CFF7E3970BE.jpg?v=1766037518"},{"product_id":"215mm-clutch-drive-plate-only-for-mx5-nc-n7-5-speed-gearbox-1x23-spline-standard-duty","title":"Organic 215mm Clutch Drive Plate only for MX5 NC N7 5 speed Gearbox 22 Spline","description":"\u003cp\u003eThese drive plates are needed when fitting a MX5 gearbox to your engine when using the standard pressure plate.\u003c\/p\u003e\n\u003cp\u003eThis is a single piece item comprising of sprung centre driven plate with organic friction material.\u003c\/p\u003e\n\u003cp\u003eThis can be used with the Zetec and pinto conversions.\u003c\/p\u003e\n\u003cp\u003ePinto uses any pinto flywheel with pinto clutch cover with this friction plate. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eZetec uses the pinto pressure plate\/clutch cover and this friction plate. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":56526419001721,"sku":null,"price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/ABBF326B-1379-456E-8AE0-1B8E65B2CB66.jpg?v=1768850567"},{"product_id":"feed-and-bleed-lines-for-concentric-release-conversions","title":"MX5 NC and RX8 Feed and bleed lines for Concentric release conversions","description":"\u003cp\u003eThis feed and bleed line kit works in conjunction with our concentric release bearing kits and suits both 5 and 6 speed RX8 gearboxes and also the MX5 NC version of our concentric kit. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with a -3 PTFE hose from the slave cylinder to a tee piece that is drilled into the bellhousing. From the other side of the tee piece, an another hose then runs to a bulkhead fitting with built in bleed nipple for you to drill through your gearbox. This provides an external point to bleed the clutch. All that is needed is to make up your own line from the master cylinder to the feed port. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSelect the gearbox option from the list depending on your application.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"RX8 5 speed","offer_id":63971736355193,"sku":null,"price":66.5,"currency_code":"GBP","in_stock":true},{"title":"RX8 6 Speed","offer_id":63971736387961,"sku":null,"price":66.5,"currency_code":"GBP","in_stock":true},{"title":"MX5 NC 5 speed","offer_id":63971736420729,"sku":null,"price":66.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/0103876F-3E53-4D5F-9036-4DA36A689A3C.jpg?v=1787645991"},{"product_id":"gear-knobs","title":"Type 9 \u0026 4 speed Ford 3D Printed Gear knobs","description":"\u003cp\u003eComplete the interior of your vehicle with our latest range of gear knobs. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are 3D printed with different logos on the top and can be supplied in numerous different colour combinations. They measure 50mm in diameter and are 75mm tall. The standard arrangement is black with white lettering\/logo. If what you require isn’t listed please get in touch. \u003c\/p\u003e\n\u003cp\u003eThe current range available is as follows:\u003c\/p\u003e\n\u003cp\u003eBRE\u003c\/p\u003e\n\u003cp\u003e2.1\u003c\/p\u003e\n\u003cp\u003eMk 1 \u0026amp; 2 Escort RS\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMk 1 \u0026amp; 2 Escort Mexico\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMk1 Escort Logo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4 speed detail\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5 speed Type 9 detail\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCustom numbers and logos\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThey have M10x1.5 thread for RWD Ford gearsticks.\u003c\/p\u003e\n\u003cp\u003eThese can be supplied for racing with different numbers and colours on request. \u003c\/p\u003e\n\u003cp\u003eWe can also add your own logo to these if required. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Mk1 RS","offer_id":64515934060921,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Mk2 RS","offer_id":64515934093689,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Mk1 Mexico","offer_id":64515934126457,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Mk2 Mexico","offer_id":64515934159225,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Ford Logo","offer_id":64515934191993,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"2.1 Logo","offer_id":64515934224761,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Type 9 Detail","offer_id":64515934257529,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"4 Speed Detail","offer_id":64515934290297,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Race Number","offer_id":64515934323065,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Custom logo","offer_id":64515934355833,"sku":null,"price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/E8F18524-9717-480C-8862-AA7A32B1CD41.jpg?v=1787646833"},{"product_id":"3d-printed-gear-knobs-with-logos-to-suit-rx8-and-mx5-gearboxes","title":"RX8 and MX5 3D Printed Gear knobs with Logos","description":"\u003cp\u003eComplete the interior of your vehicle with our latest range of gear knobs. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are 3D printed with different logos on the top and can be supplied in numerous different colour combinations. They measure 50mm in diameter and are 75mm tall. The standard arrangement is black with white lettering\/logo. If what you require isn’t listed please get in touch. \u003c\/p\u003e\n\u003cp\u003eThe current range available is as follows:\u003c\/p\u003e\n\u003cp\u003eBRE\u003c\/p\u003e\n\u003cp\u003e2.1\u003c\/p\u003e\n\u003cp\u003eMk 1 \u0026amp; 2 Escort RS\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMk 1 \u0026amp; 2 Escort Mexico\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMk1 Escort Logo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5 speed RX8 and MX5 detail\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRX8 6 speed detail\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCustom Race numbers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCustom logos\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThey have M10x1 for Mazda RX8 5 \u0026amp; 6 Speeds and the Mazda MX5 N7 gearstick.\u003c\/p\u003e\n\u003cp\u003eThese can be supplied for racing with different numbers and colours on request. \u003c\/p\u003e\n\u003cp\u003eWe can also add your own logo to these if required. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Mk1 RS","offer_id":64507368276345,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Mk2 RS","offer_id":64507368309113,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Mk1 Mexico","offer_id":64507368341881,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Mk2 Mexico","offer_id":64507368374649,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"2.1 logo","offer_id":64507368407417,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"5 speed detail","offer_id":64507368440185,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"6 speed detail","offer_id":64507368472953,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Race Number","offer_id":64507368505721,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Custom detail","offer_id":64507368538489,"sku":null,"price":30.0,"currency_code":"GBP","in_stock":true},{"title":"Ford logo","offer_id":64529827758457,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true},{"title":"Escort badge","offer_id":64529831166329,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/E8F18524-9717-480C-8862-AA7A32B1CD41.jpg?v=1787646833"},{"product_id":"215mm-4-paddle-heavy-duty-clutch-for-pinto-and-zetec-to-mazda-nc-n7-gearbox","title":"215mm 4 paddle Heavy Duty Clutch for Pinto and Zetec to Mazda NC N7 Gearbox","description":"\u003cp\u003eThese are our clutches that are needed when fitting a Mazda MX5 NC gearbox to your pinto or zetec engine. These clutches are a 'Heavy Duty' spec clutch for most fast road, Track day and Race setups.\u003c\/p\u003e\n\u003cp\u003eThe clutches are a direct bolt on fit to your existing cast flywheel or lightweight steel flywheel with a pinto clutch. All original fixings can be retained. When using a zetec, an 1800 zetec flywheel redrilled to take pinto clutch is required. Or a steel flywheel that takes a pinto clutch.\u003c\/p\u003e\n\u003cp\u003eThe clutch is a sprung 4 paddle 215mm unit and features a compatible spline for the MX5 gearbox. The centre plate is a sprung item which is suitable for fast road, track and race applications.\u003c\/p\u003e\n\u003cp\u003eThis is a 2 part item comprising of pressure plate and centre driven plate.\u003c\/p\u003e\n\u003cp\u003eThis can be used with the standard clutch and slave cylinder, \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-n7-5-speed-hydraulic-concentric-release-kit\"\u003ethe hydraulic concentric kit\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-nc-5-speed-cable-clutch-fork-conversion\"\u003ecable clutch conversion.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur RX8 and MX5 release bearing must be used when using this clutch. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eClick here.\u003c\/a\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":64564948894073,"sku":"215MMCLUTCHNC","price":255.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/EDDE4F7F-0FC2-46EB-A772-65E94E9118B6.png?v=1744114777"},{"product_id":"215mm-4-paddle-heavy-duty-clutch-for-pinto-and-zetec-to-mazda-type-9-rx8-1x23-spline","title":"215mm 4 paddle Heavy Duty Clutch for Pinto and Zetec to Mazda Type 9 \u0026 RX8 1\"x23 spline","description":"\u003cp\u003eThese clutches are a 'Heavy Duty' spec clutch for most fast road, Track day and Race setups.\u003c\/p\u003e\n\u003cp\u003eThe clutches are a direct bolt on fit to your existing cast flywheel or lightweight steel flywheel with a pinto clutch. All original fixings can be retained. When using a zetec, an 1800 zetec flywheel redrilled to take pinto clutch is required. Or a steel flywheel that takes a pinto clutch.\u003c\/p\u003e\n\u003cp\u003eThe clutch is a sprung 4 paddle 215mm unit and features a compatible spline for the MX5 gearbox. The centre plate is a sprung item which is suitable for fast road, track and race applications. The clutch centre is 1\"x23 to suit Ford and RX8 gearboxes.\u003c\/p\u003e\n\u003cp\u003eThis is a 2 part item comprising of pressure plate and centre driven plate.\u003c\/p\u003e\n\u003cp\u003eThis can be used with the standard clutch and slave cylinder, \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-n7-5-speed-hydraulic-concentric-release-kit\"\u003ethe hydraulic concentric kit\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/mx5-nc-5-speed-cable-clutch-fork-conversion\"\u003ecable clutch conversion.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOur RX8 and MX5 release bearing must be used when using this clutch. \u003ca href=\"https:\/\/www.butcherraceengineering.co.uk\/products\/rx8-5-6-speed-release-bearing\"\u003eClick here.\u003c\/a\u003e\u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"Default Title","offer_id":64565016658297,"sku":"215MMCLUTCHNC","price":255.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/files\/EDDE4F7F-0FC2-46EB-A772-65E94E9118B6.png?v=1744114777"},{"product_id":"single-piece-propshaft-for-mk1-and-mk2-escort-to-suit-mx5-nc-gearbox","title":"Single Piece Propshaft for Mk1\/2 Escort to Mazda MX5 NC gearbox","description":"\u003cp\u003eThis is a brand new single piece propshaft for a Mk1 or Mk2 Escort when using a Mazda MX5 NC 5 speed gearbox. The unit comes with brand new universal joints and centre tube, fully balanced ready to fit.\u003c\/p\u003e\n\u003cp\u003eThese can be manufactured for English axles with large and small flanges and also Atlas flanges. Small flange diffs have an outside diameter of approximately 86mm and large flanges have approximately 92mm overall diameter. If you are unsure please get in touch before ordering.\u003c\/p\u003e\n\u003cp\u003eThese are made to order so its recommended to confirm the required length by measuring from the end of the gearbox to the diff flange and giving us this dimension when ordering. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"English Small flange","offer_id":64696668914041,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true},{"title":"English Large Flange","offer_id":64696668946809,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true},{"title":"Atlas flange","offer_id":64696668979577,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"single-piece-propshaft-for-mk1-2-cortina-to-suit-mx5-nc-gearbox","title":"Single Piece Propshaft for Mk1\/2 Cortina to suit MX5 NC gearbox","description":"\u003cp\u003eThis is a brand new single piece propshaft for a Mk1 or Mk2 Cortina when using a Mazda MX5 NC 5 speed gearbox. The unit comes with brand new universal joints and centre tube, fully balanced ready to fit.\u003c\/p\u003e\n\u003cp\u003eThese can be manufactured for English axles with large and small flanges and also Atlas flanges. Small flange diffs have an outside diameter of approximately 86mm and large flanges have approximately 92mm overall diameter. If you are unsure please get in touch before ordering.\u003c\/p\u003e\n\u003cp\u003eThese are made to order so its recommended to confirm the required length by measuring from the end of the gearbox to the diff flange and giving us this dimension when ordering. \u003c\/p\u003e","brand":"Butcher Race Engineering","offers":[{"title":"English Small flange","offer_id":64696680513913,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true},{"title":"English Large Flange","offer_id":64696680546681,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true},{"title":"Atlas flange","offer_id":64696680579449,"sku":null,"price":245.0,"currency_code":"GBP","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/1386\/1936\/collections\/NC_box.jpg?v=1698061154","url":"https:\/\/www.butcherraceengineering.co.uk\/collections\/mx5-nc-n7-gearbox-conversion-parts.oembed?page=2","provider":"Butcher Race Engineering","version":"1.0","type":"link"}